Enabling/Disabling Ports

You can enable ports by assigning them to the LAN network, or disable them by assigning them to no network.

To enable/disable a port

1. Click Network in the main menu, and click the Ports tab.

   The Ports page appears.

2. Next to the desired port, click Edit.

   The Port Setup page appears.

3. In the Assign to Network drop-down list, do one of the following:
   • To enable a LAN port, select LAN.
   • To enable the WAN port, select Internet.
   • To disable a port, select None.
4. Click Apply.

   A warning message appears.

5. Click OK.

   The port is reassigned to the specified network or purpose.