Enabling/Disabling Hide NAT

Hide Network Address Translation (Hide NAT) enables you to share a single public Internet IP address among several computers, by "hiding" the private IP addresses of the internal computers behind the ZoneAlarm router's single Internet IP address.

	Note: If Hide NAT is disabled, you must obtain a range of Internet IP addresses from your ISP. Hide NAT is enabled by default.
	Note: Static NAT and Hide NAT can be used together.

To enable/disable Hide NAT

Click Network in the main menu, and click the My Network tab.
The My Network page appears.
In the desired network's row, click Edit.
The Edit Network Settings page appears.
From the Hide NAT list, select Enabled or Disabled.
Click Apply.
A warning message appears.
Click OK.
- If you chose to disable Hide NAT, it is disabled.
- If you chose to enable Hide NAT, it is enabled.